Automatically fits the image to a 16:9 projection screen during Auto Keystone Correction.
1. Press Settings
2. Go to: Image Correction > Keystone Settings
3. Enable Auto Screen Alignment
How to use:
- If Uninterrupted Auto Keystone Correction is ON:
- Adjust the projector position until the image fully covers the screen
- Alignment will occur automatically
- If OFF:
- Adjust the projector position
- Go to: Image Correction > Auto Keystone Correction
- If you need to further fine-tune the projected image after screen alignment, select Manual Keystone Correction to adjust the image.
Notes:
- The default projection image must fully cover the screen
- Projections cannot be performed from a distance too far from the screen. The projected image displayed on the screen must cover an area greater than half the size of the digital projector's default image area.
- The screen must have a black border