After enabling the Auto Screen Alignment feature, the HORIZON 20 series will automatically adjust the projection image to fill the screen (for a 16:9 aspect ratio screen).
To enable Auto Screen Alignment:
1. Press the “Settings” button on the XGIMI remote, go to "All Settings" -- "Projector" -- "Image Correction" -- "Keystone Settings", and enable "Auto Screen Alignment".
2. If "Auto Keystone upon Motion" is also enabled, rotate the projector until the default image fully covers the projection screen. The system will automatically detect the screen and complete the alignment process.
3. If "Auto Keystone upon Motion" is turned off, rotate the projector to ensure the default image fully covers the screen, then press the “Settings” button, go to "All Settings" -- "Projector" -- "Image Correction", and select "Auto Keystone Correction" to trigger automatic screen alignment.
4. For any further fine-tuning of the image after screen alignment, select "Manual Keystone Correction" to adjust the four corners and the size of the image frame.
Tips:
① The projector’s default image must fully cover the projection screen surface.
② The area of the projection screen must be larger than half of the default image.
③ A projection screen with a black border is required.
④ Auto Screen Alignment is not supported after Lens Shift.