All projectors are factory color-calibrated, but slight manufacturing tolerances are normal. Advanced users can fine-tune white balance manually.
---
Steps
1. While playing video content, press the Settings button on the remote control to open Quick Settings, then select “Display.”
2. Scroll down to “Advanced Settings” and enter it.
3. Select 2-Point White Balance Correction
4. Adjust RGB values for:
- Gain
- Offset
Example
If the image appears too red, reduce the Red Gain value first.
Additional Information
The projector also supports:
11-Point White Balance Correction
Adjustment points include:
5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, and 100%.
For most users, 2-point adjustment is sufficient. Accurate 11-point calibration typically requires professional calibration hardware and software.