1. When the projector is on an HDMI input source
2. Press the Settings button on the remote control to open Quick Settings, then select All Settings.
3. Go to: Channels & Inputs
4. Select HDMI Settings (Select Active Input)
5. Select HDMI EDID Version
Options:
- EDID 1.4: Prioritizes device compatibility
- EDID 2.0: Enables higher bandwidth and better image quality
Important:
- EDID 1.4 does NOT support 4K @ 60Hz
- To enable 4K @ 60Hz:
- Select EDID 2.0
- Use an HDMI 2.0 (or higher) cable
- Ensure the source device supports 4K @ 60Hz output
