Steps
1. Press the Settings button on the remote to open Quick Settings, then select All Settings.
2. Navigate to: Projector > Keystone
3. Select Quick Manual Correction
4. The Image Zoom screen will appear first.
- Use the Left/Right buttons to adjust the image size.
- When finished, press and hold the OK button to continue.
5. Enter the 4-point correction screen.
- Press OK to cycle through the four corner control points clockwise.
- Use the directional buttons to adjust the selected corner.
---
Notes
- Adjustments can only be made in the directions indicated by the on-screen arrows.
- If an arrow is not displayed, the adjustment limit has been reached in that direction.
- If additional correction is required, reposition the projector and try again.
---
Tips
- To maintain proper image geometry, adjust the center circle until it appears as close to a perfect circle as possible.
- The projector's native aspect ratio is 16:9.
- This feature is particularly useful when projecting onto a flat wall.