Wall Color Adaptation automatically compensates for the color of your projection wall surface to produce more natural and accurate colors.
To enable Wall Color Adaptation
1. Press the Settings button on the remote to open Quick Settings, then select All Settings.
2. Go to: Projector > Keystone.
3. Select Wall Color Adaptation.
4. Select Adapt Now.
The projector will analyze the wall color and generate an optimized color profile.
---
After calibration
Choose one of the following:
- Use Adapted Colors
- Use Original Colors
Press OK to save your selection.
---
Restore the original settings
Go to: Projector > Keystone > Wall Color Adaptation > Restore
---
Notes
- A projection distance of 1.5 to 4 meters and an angle within 30° to the left or right.
- The adjustable color temperature range is from 3000K to 15000K.
- It does not support walls made up of multiple color blocks.
- When Lens Shift is used, the Wall Color Adaptation function will no longer be supported.
To enable Wall Color Adaptation
1. Press the Settings button on the remote to open Quick Settings, then select All Settings.
2. Go to: Projector > Keystone.
3. Select Wall Color Adaptation.
4. Select Adapt Now.
The projector will analyze the wall color and generate an optimized color profile.
---
After calibration
Choose one of the following:
- Use Adapted Colors
- Use Original Colors
Press OK to save your selection.
---
Restore the original settings
Go to: Projector > Keystone > Wall Color Adaptation > Restore
---
Notes
- A projection distance of 1.5 to 4 meters and an angle within 30° to the left or right.
- The adjustable color temperature range is from 3000K to 15000K.
- It does not support walls made up of multiple color blocks.
- When Lens Shift is used, the Wall Color Adaptation function will no longer be supported.