You can enable a 240 Hz refresh rate when the projector is connected to a compatible HDMI device.
Enable 240 Hz
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select Display.
3. Go to: Display > Advanced Settings.
4. Turn on Projector Super Frame.
5. Wait for the projector to switch display modes automatically.
6. Configure your HDMI source device
Set the following display settings on your connected device:
- Resolution: 1920 × 1080
- Refresh Rate: 240 Hz
Tip
If you're using a Windows PC, use Extend display mode and set the HORIZON 30 Series as the primary display to ensure 240 Hz is available.
Note
A 240 Hz refresh rate is supported only at 1920 × 1080 (1080p).
Enable 240 Hz
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select Display.
3. Go to: Display > Advanced Settings.
4. Turn on Projector Super Frame.
5. Wait for the projector to switch display modes automatically.
6. Configure your HDMI source device
Set the following display settings on your connected device:
- Resolution: 1920 × 1080
- Refresh Rate: 240 Hz
Tip
If you're using a Windows PC, use Extend display mode and set the HORIZON 30 Series as the primary display to ensure 240 Hz is available.
Note
A 240 Hz refresh rate is supported only at 1920 × 1080 (1080p).