Variable Refresh Rate (VRR) synchronizes the projector's refresh rate with your source device to reduce screen tearing and improve gaming performance.
Enable VRR
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select Display.
3. Go to: Display > Advanced Settings.
4. Turn on Projector Super Frame.
5. Turn on VRR.
6. Configure your HDMI source device
- Set the display resolution to 3840 × 2160 (4K) or 1920 × 1080 (1080p).
- Enable VRR in your device's display or gaming settings.
Requirements
- Your HDMI source device must support VRR.
- VRR range supported at 3840 × 2160 (4K): 40 Hz ~ 120 Hz.
- VRR range supported at 1920 × 1080 (1080p): 40 Hz ~ 240 Hz.
Enable VRR
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select Display.
3. Go to: Display > Advanced Settings.
4. Turn on Projector Super Frame.
5. Turn on VRR.
6. Configure your HDMI source device
- Set the display resolution to 3840 × 2160 (4K) or 1920 × 1080 (1080p).
- Enable VRR in your device's display or gaming settings.
Requirements
- Your HDMI source device must support VRR.
- VRR range supported at 3840 × 2160 (4K): 40 Hz ~ 120 Hz.
- VRR range supported at 1920 × 1080 (1080p): 40 Hz ~ 240 Hz.