HDMI EDID Version
Some older HDMI devices may require a different EDID version for proper compatibility.
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select All Settings.
3. Go to: Channels & Inputs.
4. Select HDMI Settings (Select Active Input)
5. Select HDMI EDID Version
Choose one of the following options:
EDID 1.4
Provides maximum compatibility with older HDMI devices.
EDID 2.0
Supports higher bandwidth and enables features such as:
- 4K @ 60 Hz
- Higher-quality video transmission
EDID 2.1
Supports maximum bandwidth and enables features such as:
- 4K @ 120 Hz
- Higher-quality video transmission
Important
To enable 4K @ 120 Hz, make sure that:
- EDID 2.1 is selected.
- An HDMI 2.1 (or later) cable is used.
- The connected source device supports 4K @ 120 Hz output.
Some older HDMI devices may require a different EDID version for proper compatibility.
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select All Settings.
3. Go to: Channels & Inputs.
4. Select HDMI Settings (Select Active Input)
5. Select HDMI EDID Version
Choose one of the following options:
EDID 1.4
Provides maximum compatibility with older HDMI devices.
EDID 2.0
Supports higher bandwidth and enables features such as:
- 4K @ 60 Hz
- Higher-quality video transmission
EDID 2.1
Supports maximum bandwidth and enables features such as:
- 4K @ 120 Hz
- Higher-quality video transmission
Important
To enable 4K @ 120 Hz, make sure that:
- EDID 2.1 is selected.
- An HDMI 2.1 (or later) cable is used.
- The connected source device supports 4K @ 120 Hz output.