All the HORIZON 30 Series projectors are factory color-calibrated. If needed, advanced users can fine-tune white balance manually.
Adjust White Balance
1. While the video is playing, press the Settings button on the remote to open Quick Settings, then select Display.
2. Go to: Display > Advanced Settings.
3. Select 2-Point White Balance Correction.
4. Adjust the Gain and Offset values for each RGB channel.
Example
If the image appears too warm or too red, reduce the Red Gain value first.
Advanced calibration
The HORIZON 30 Series also supports 11-Point White Balance Correction, with adjustment points at:
- 5%
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
Tip
For most users, 2-point adjustment provides sufficient accuracy.
Professional 11-point calibration typically requires dedicated calibration hardware and software.
Adjust White Balance
1. While the video is playing, press the Settings button on the remote to open Quick Settings, then select Display.
2. Go to: Display > Advanced Settings.
3. Select 2-Point White Balance Correction.
4. Adjust the Gain and Offset values for each RGB channel.
Example
If the image appears too warm or too red, reduce the Red Gain value first.
Advanced calibration
The HORIZON 30 Series also supports 11-Point White Balance Correction, with adjustment points at:
- 5%
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
Tip
For most users, 2-point adjustment provides sufficient accuracy.
Professional 11-point calibration typically requires dedicated calibration hardware and software.