Pair the remote
1. Turn on the projector.
2. Place the remote within 10 cm (4 in) of the projector.
3. Press and hold the Back and Home buttons simultaneously.
4. Release both buttons when the indicator starts flashing.
5. Wait until you hear the confirmation tone. Pairing is complete.
Notes
- If pairing is not completed within 30 seconds, the remote automatically exits pairing mode.
- If pairing fails, repeat the steps above.
1. Turn on the projector.
2. Place the remote within 10 cm (4 in) of the projector.
3. Press and hold the Back and Home buttons simultaneously.
4. Release both buttons when the indicator starts flashing.
5. Wait until you hear the confirmation tone. Pairing is complete.
Notes
- If pairing is not completed within 30 seconds, the remote automatically exits pairing mode.
- If pairing fails, repeat the steps above.