The HORIZON 30 Series does not provide a one-tap option to view HDMI signal information, but the relevant details can be checked in the following ways.
Method 1
When the HORIZON 30 Series switches from the Google TV home screen to an HDMI input source, a pop-up appears in the top-left corner for 4 seconds, showing the HDMI port in use, the resolution, the refresh rate, and the HDR status.
If the HDMI signal from the connected device later changes its resolution, refresh rate, or HDR status, this pop-up appears again.
Method 2
1. Switch the projector to an HDMI input source.
2. Press the Settings button on the remote to open Quick Settings, then select Display.
3. Go to: Display > Advanced Settings
4. Turn on Refresh Rate.
Once Refresh Rate is on, the current refresh rate is always displayed in the top-right corner of the screen.
Notes
- To use a refresh rate above 120 Hz on the projector, enable Projector Super Frame in advance.
- A 240 Hz refresh rate is supported only at 1920 × 1080 (1080p).